Honeywell HH490 - CHAPTER 12 - MAINTENANCE AND TROUBLESHOOTING; Clean the Scanner

HH490 User Guide 183
Selection
Setting
* Indicates default
Serial Command #
Indicates a numeric entry
Page
MacroPDF417 On PDFMAC1 124
*Off PDFMAC0 124
MicroPDF417 Default All Micro PDF417 Settings MPDDFT 124
On MPDENA1 124
*Off MPDENA0 124
MicroPDF417 Msg. Length Minimum (1-366) *1 MPDMIN### 125
Maximum (1-366) *366 MPDMAX### 125
GS1 Composite Codes On COMENA1 125
*Off COMENA0 125
UPC/EAN Version On COMUPC1 125
*Off COMUPC0 125
GS1 Composite Codes Msg.
Length
Minimum (1-2435) *1 COMMIN#### 126
Maximum (1-2435) *2435 COMMAX#### 126
GS1 Emulation GS1-128 Emulation EANEMU1 127
GS1 DataBar Emulation EANEMU2 127
GS1 Code Expansion Off EANEMU3 127
EAN8 to EAN13 Conversion EANEMU4 127
*GS1 Emulation Off EANEMU0 127
TCIF Linked Code 39 On T39ENA1 127
*Off T39ENA0 127
QR Code Default All QR Code Settings QRCDFT 127
*On QRCENA1 128
Off QRCENA0 128
QR Code Msg. Length Minimum (1-7089) *1 QRCMIN#### 128
Maximum (1-7089) *7089 QRCMAX#### 128
QR Code Append *One Scan QRCAPP1 129
Swipe QRCAPP2 129
Point & Shoot QRCAPP3 129
Off QRCAPP0 129
QR Code Page QR Code Page (*3) QRCDCP## 129
DotCode Default All DotCode Settings DOTDFT 129
On DOTENA1 130
*Off DOTENA0 130
Poor Quality DotCodes Poor Quality DotCodes On DOTEXS1 130
*Poor Quality DotCodes Off DOTEXS0 130
DotCode Msg. Length Minimum (1- 2400) *1 DOTMIN#### 130
Maximum (1- 2400) *2400 DOTMAX#### 130
Digimarc Barcode Decoder Attempts (0-10) *5 DIGSTR## 131
*Off DIGENA0 131