Mesa - Advanced Properties
Start > Settings > Control Panel > Data Collection > Data Options > HHP ID
Option Default Value
UPCA Disabled
EAN13 Disabled
Code39 Disabled
Code128 Disabled
Interleaved 2 of 5 Disabled
Code93 Disabled
When the Mesa symbology is chosen on the Symbology panel (the Enable checkbox is checked) the Advanced button must be
clicked and the desired Mesa Advanced Properties sub-symbology selected.
When Mesa is disabled on the Symbology panel (the Enable checkbox is cleared), click the Advanced button and uncheck all
parameters or sub-symbologies, on the Mesa Advanced Properties panel.
Note: The root symbology (UPCA, EAN13, Code39, Code128, Interleaved 2 of 5 and/or Code 93) must be enabled before
the matching enabled Mesa sub-symbology will decode.
4-106
To Next Page
Loading...
