Honeywell MX7 Tecton - Enabler Installation and Configuration; Enabler Installation

Remove Programs
Start > Settings > Control Panel > Remove Programs
Note: Lists programs installed in RAM that have been marked for removal.
In some OSversions, this panel is replaced by the Installed Programs panel. The Installed Programs panel does not allow any
user interaction.
Select a program and tap Remove. Follow the prompts on the screen to uninstall MX7 Tecton user-installed only programs.
The change takes effect immediately.
Files stored in the My Documents folder are not removed using this option.
Note: Do not remove pre-installed programs using this option. Contact Technical Assistance for assistance if pre-installed
programs must be deleted.
4-173