Bluetooth Device List
The discovered paired devices may or may not be identified with an icon. Discovered devices without an icon can be paired as
a Serial device, Scanner or a Printer. The Bluetooth panel assigns an icon to the device name.
An icon with a red background indicates the device's Bluetooth connection is inactive.
An icon with a white background indicates the device is connected to the MX7 Tecton and the device's Bluetooth connection is
active.
Double-tap a device in the list to open the device properties menu. The target device does not need to be active.
Clear Button
Deletes all devices from the Device table that are not currently paired. A dialog box is presented, "Delete all disconnected
devices? Yes/No". Tap the Yes button to remove disconnected or deleted devices from the device table. The devices are
removed from the Device table after any reboot sequence and when LXEZ Pairing is re-launched without a reboot sequence.
Tap the No button to make no changes. See Clear Pairing Table on Boot.
4-61