Certificates
Note: Please refer to the Security Primer to prepare the Authentication Server and Access Point for communication.
Note: It is important that all dates are correct on the MX7 Tecton and host computers when using any type of certificate.
Certificates are date sensitive and if the date is not correct authentication will fail.
Quick Start
Root Certificates are necessary for EAP-TLS, PEAP/GTC and PEAP/MSCHAP.
1. Generate a Root CA Certificate and download it to a PC.
2. Connect the MX7 Tecton to the desktop PC using ActiveSync and copy the certificate to the MX7 Tecton \System
folder.
3. Install the Root CA Certificate.
User Certificates are necessary for EAP-TLS
1. Generate a User Certificate and Private Key file and download it to a PC.
2. Connect the MX7 Tecton to the desktop PC using ActiveSync and copy the certificate and private key file to the MX7
Tecton \System folder.
3. Install the User Certificate and Private Key file.
4. After installation, perform a Suspend/Resume.
5. Verify installation.
8-41
To Next Page
Loading...
