Mixer
Start > Settings > Control Panel > Mixer
The MX7 Tecton has a speaker (located above the scan button). It is active when a headset is not connected to the device.
Use the settings on these panels to adjust the volume, record gain and sidetone for microphone input, speaker and speaker
output.
Headsets can be enabled, disabled and selected using these panels.
Factory Default Settings
Output
Speaker Volume 7.5 dB
Headset Volume 3.0 dB
Input
Input Mic1
Record Gain 24.0 dB
Boost + 30.0 dB
Sidetone 0.0 dB
4-149
To Next Page
Loading...
