File Menu Options
Connect
The Connect option under the File menu allows the user to initiate a manual connection to the Mobile Device
Server. The connection methods, by default, are wireless and COM connections. Any updates available will be
applied to the MX7 Tecton immediately upon a successful connection.
Scan
Config
Note: The Scan Configuration feature is not supported. The Scan Config option under the File menu allows the
user to configure Enabler settings using a special bar code that can be created using the Avalanche MC Console
utilities. Refer to the Wavelink Avalanche Mobility Center User Guide for details.
Settings
The Settings option under the File menu allows the MX7 Tecton user to access the control panel to locally
configure the Enabler settings. The Enabler control panel is, by default, password protected.
The default Settings password is
system
The password is not case-sensitive.
7-9
To Next Page
Loading...
