Start Menu Program Options
The following list represents the factory default program installation. Your system may contain different items from those
shown below, based on the software and hardware options purchased.
Communication Stores Network communication options
Connect Run this command after setting up a connection
Start (or Stop)
FTP Server
Begin / end connection to FTP server
Command Prompt The command line interface in a separate window
eXpress Scan Option. Requires Wavelink Avalanche option eXpress Config
Internet Explorer Access web pages on the world wide Internet
Microsoft WordPad Opens an ASCII notepad
Remote Desktop
Connection
Log on to a Windows Terminal Server
RFTerm Option. Terminal emulation application
Settings
Access to all Control Panels, a shortcut to the Network and Dialup Control Panel and access to
Taskbar options
Summit Set Summit radio / network parameters
Transcriber Enter data using the stylus on the touch screen
Wavelink Avalanche Option. Remote management for networked devices
Windows Explorer File management program
l If installed, RFTerm runs automatically at the conclusion of each reboot.
l If installed and enabled, AppLock runs automatically at the conclusion of each reboot.
l The wireless client connects automatically during each reboot.
l Bluetooth re-connects to nearby paired devices automatically at the conclusion of each reboot.
l If installed and pre-configured, Wavelink Avalanche connects remotely and downloads updates automatically during
each reboot.
4-14