Chapter 8: Wireless Network Configuration
Introduction
The Summit client device is a Summit 802.11a/b/g radio, capable of 802.11a, 802.11b and 802.11g data rates. The radio can be
configured for no encryption, WEP encryption or WPA security.
Security Options Supported are
l None
l WEP
l LEAP
l WPA-PSK
l WPA/LEAP
l PEAP-MSCHAP
l PEAP-GTC
l EAP-TLS
l EAP-FAST
Complete configuration options are detailed in the Summit Client Utility.
Important Notes
It is important that all dates are correct on the MX7 Tecton and host computers when using any type of certificate.
Certificates are date sensitive and if the date is not correct authentication will fail.
It may be necessary to upgrade radio software in order to use certain Summit Client Utility (SCU) features.
Contact Technical Assistance for details.
When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation. For regulatory domains
in which the U-NII 3 band is allowed, the following channels are supported: 149, 153, 157 and 161. The AP must
be configured accordingly.
After making any changes to the wireless configuration, warmboot the MX7 Tecton.
8-1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
