Chapter 4: Software
Introduction
There are several different aspects to the setup, configuration and operation of the MX7 Tecton. Many of the setup and
configuration settings are dependent upon the optional features such as hardware and software installed on the unit. The
examples found in this section are to be used as examples only, the configuration of your specific MX7 Tecton computer may
vary. The following sections provide a general reference for the configuration of the MX7 Tecton and some of its optional
features.
Operating System
Your MX7 Tecton operating system is Microsoft® Windows® Embedded CE 6. The MX7 Tecton operating system revision is
displayed on the Desktop. This is the factory default setting for the Desktop Display Background.
Windows CE Operating System
Note: For general use instruction, please refer to commercially available Windows CE user’s guides or the Windows CE on-
line Help application installed with the MX7 Tecton
This segment assumes the system administrator is familiar with Microsoft Windows options and capabilities loaded on most
standard Windows computers.
Therefore, the sections that follow describe only those Windows capabilities that are unique to the MX7 Tecton and its
Windows CE environment.
4-1
To Next Page
Loading...
