Server Contact
Note: Your MX7 Tecton screen display may not be exactly as shown above. Contact Technical Assistance for upgrade
availability and version information.
Sync Clock Reset the time on the MX7 Tecton based on the time on the Mobile Device Server host PC.
Contact
On Startup – Connect to the Mobile Device Server when the Enabler is accessed.
On Resume – Connect to the Mobile Device Server when resuming from Suspend mode.
On IPChange – Connect to the Mobile Device Server when the IP address of the MX7 Tecton
changes.
On Ext. Power – Initiate connection to the Mobile Device Server when the device is connected to an
external power source, such as based on a docking event.
Contact Periodically /
Periodic Update
Allows the administrator to configure the Enabler to contact the Mobile Device Server and query for
updates at a regular interval.
Wakeup device if sus-
pended
If the time interval for periodic contact with the Mobile Device Server occurs, a mobile device that is
in Suspend Mode can wakeup and process updates.
Reboot before attempt Reboot mobile device before attempting to contact Mobile Device Server.
Require external power Only connect when the mobile device has external power.
Use relative offset Dimmed.
7-12
To Next Page
Loading...
