Honeywell MX7 Tecton - Capslock; Enable Keypad Backlight; Misc; Touch Screen Disable

Misc
Options on this tab configure device specific options. Note that options not available on the MX7 Tecton are dimmed or grayed
out.
CapsLock
By default, CapsLock is disabled after a warmboot. To enable CapsLock after a warmboot, check this checkbox.
Touch Screen Disable
By default, the MX7 Tecton touch screen is enabled. To disable the touch screen after a warmboot, check this checkbox.
Enable Keypad Backlight
The keypad backlight default setting is to follow the display backlight setting until it is changed by the user.
Uncheck the checkbox to disable the keypad backlight.
4-155