Honeywell MX7 Tecton - Enabler Uninstall Process; Stop the Enabler Service

Enabler Uninstall Process
To remove the Avalanche Enabler from the MX7 Tecton:
l Delete the Avalanche folder located in the \System directory.
l Warm boot the MX7 Tecton.
The Avalanche folder cannot be deleted while the Enabler is running. See Stop the Enabler Service.
If sharing errors occur while attempting to delete the Avalanche folder, warm boot the MX7 Tecton, immediately delete the
Avalanche folder, and then perform another warm boot.
Stop the Enabler Service
To stop the Enabler from monitoring for updates from the Mobility Center Console:
1. Open the Enabler Settings Panels by tapping the Enabler icon on the MX7 Tecton desktop.
2. Select File > Settings.
3. Select the Preferences tab.
4. Select Do not monitor to prevent automatic monitoring upon startup.
5. Select Exit Application for an immediate shutdown of all Enabler update functionality upon exiting the user interface.
6. Click the OK button to save the changes.
7. Reboot the MX7 Tecton if necessary.
7-2