Honeywell MX7 Tecton - Mobile Device Wireless and Network Settings

Mobile Device Wireless and Network Settings
Once the connection to the Mobile Device Server is established, the MX7 Tecton Enabler attempts to apply all network and
wireless settings contained in the active profile.
The success of the application of settings is dependent upon the local configuration of control parameters for the Enabler.
These local parameters cannot be overridden from the Avalanche MC Console.
The default Enabler adapter control settings are:
l Manage network settings – enabled
l Use Avalanche network profile – enabled
l Manage wireless settings – disabled for Windows CE devices
To configure the Avalanche Enabler management of the network and wireless settings:
1. Open the Enabler Settings Panels by tapping the Enabler icon on the desktop.
2. Select File > Settings.
3. Select the Adapters tab.
4. Choose settings for the Use Manual Settings parameter.
5. Choose settings for Manage Network Settings, Manage Wireless Settings and Use Avalanche Network Profile.
6. Click the OK button to save the changes.
7. Reboot the device.
7-4