Honeywell SmartLine SLG 700 User Manual

Page 102 SLG 700 SmartLine Level Transmitter User’s Manual Revision 8
Correlation Model Recalculation
Information on what triggers a correlation model recalculation is summarized in the table
below.
Table 4-4: Correlation Model Recalculation
Parameter recalculated
Parameters that will trigger
recalculation / reset required
Surface Model Gain
Vapor DC, Upper DC, Lower DC, Application
Type, Probe Type, Transmitter Model,
Mounting Location, Sensor Connection Type,
Mounting Diameter
Interface Model Gain
Upper DC, Lower DC, Application Type,
Probe Type, Transmitter Model, Mounting
Location, Sensor Connection Type, Mounting
Diameter
End of Probe Model Gain, Width, Attenuation
Probe Type, Probe End Type, Centering Disc
Diameter, Transmitter Model, Mounting
Location, Sensor Connection Type, Mounting
Diameter
Process Connector Model Gain, Width,
Attenuation
Transmitter Model, Sensor Connection Type,
Probe Type
Propagation Factor
Transmitter Model, Probe Type
Vapor Attenuation
Transmitter Model, Probe Type
Minimum BDH/BDL
Vapor DC, Upper DC, Lower DC, Probe
Type, Application Type
BDH/BDL
Vapor DC, Upper DC, Lower DC, Probe
Type, Application Type

Honeywell SmartLine SLG 700 Specifications

General

Brand	Honeywell
Model	SmartLine SLG 700
Category	Transmitter
Language	English