Honeywell SmartLine SLG 700 User Manual

Revision 8 SLG 700 SmartLine Level Transmitter User’s Manual Page 109
Table 4-7: Advanced Config sub-menu
This table describes the Advanced Display menu’s “Advance Config” sub-menu.
Advanced configuration is described in detail in the SLG 700 HART Option manual, #34-SL-25-06.
<Return> Return to the Level 1 menu
Level 2
Level 3
Description
Action
<Return>
Mounting
Note: Loop
must be
removed from
Automatic
Control
Transmtr Model (R)
SLG720
SLG726
Standard
High Temperature & High
Pressure
Read only
Sensor Conn Type
(R)
Direct
Remote
Type of connection of
sensor housing to
process connection.
Press  to enter
menu selection
 and  to select
number.
 to enter and
shift to next digit
Proc Conn Type (R)
Threaded
Flanged
Type of Process
connector
Read only
Mounting Loc
Tank
Bracket
Nozzle
Bypass
Stillwell
Location and structure
of transmitter mounting.
Press  to enter
menu selection
 and  to select
number.
 to enter and
shift to next digit
Mounting Angle
(Visible for Tank,
Bracket or Nozzle
mounting location
only)
0 to 90 degrees
Angle of transmitter.
Nozzle Height
(Nozzle Mounting Loc
only)
##.###
Mounting structure
height.
Nozzle Dia
(Nozzle Mounting Loc
only)
##.###
Diameter of the nozzle.
Bypass Dia
(Bypass Mounting
Loc only)
##.###
Diameter of the bypass.
Stillwell Dia
(Stillwell Mounting
Loc only)
##.###
Diameter of the Stillwell.
Backgrnd Type
Factory
Field
Obstacle
Field background type to
use for factory-preset
noise, captured noise or
captured obstacle
cancellation.
Dynm Bkgd Updt
(Field and Obstacle
Backgrnd Type only)
Enabled
DIsabled
Captured background is
updated every few hours
and for each 10°C
(18°F) change in
product temperature.
Full Tank Det
Enabled
Disabled
Detection of product at
top of flange.

Honeywell SmartLine SLG 700 Specifications

General

Brand	Honeywell
Model	SmartLine SLG 700
Category	Transmitter
Language	English