Revision 8 SLG 700 SmartLine Level Transmitter User’s Manual Page 103
Table 4-5: Display Config sub-menu
This table describes the Advanced Display menu’s “Display Config” sub-menu.
<Return> Return to the Level 1 menu
Adjust the LCD contrast
level.
Range from 0 to 9.
Default: 5
Select 0 for minimum
contrast and 9 for maximum
contrast.
Press to enter
menu selection
and to select
number.
to enter and shift
to next digit
The user can set a 4-digit
numeric (0-9) password
Default: 0000.
If password is set to a value
other than 0000, display
would prompt for valid
password if user tries to
change device configuration.
User needs to provide
password only one time
when entering menu mode.
Press to enter
menu selection
and to select
from list.
to enter
English
French
German
Italian
Spanish
Russian
Turkish
Select the language for the
Display.
Default: English
Time duration, in seconds,
that each configured screen
is shown before moving to
the next screen.
Range: 3 to 30 seconds
Default: 10 seconds
Press to enter
menu selection
and to select
number.
to enter and shift
to next digit
Activate rotation between up
to 8 screens.
If user selects ‘Yes’ ,
screens would rotate
automatically based on
configured Rotation Time.
Press to enter
menu selection
and to select
number.
to enter
To Next Page
Loading...
Need help?
General
