Honeywell SmartLine SLG 700 - Page 120

Page 104 SLG 700 SmartLine Level Transmitter User’s Manual Revision 8
Display Config” sub-menu, continued ..
Screens 1-8
<Return>
Screen Format
(FF read only)
None
PV
PV & Bar Graph
PV & Trend
Select the Screen
format from the list.
Press  to enter
menu selection
 and  to select
from list
Press  to enter
menu selection
 and  to select
from list.
Trend Hours
(FF read only)
##
Select the amount of
historic data visible on
the Trend screen.
Range: 1 to 999 hours.
Applies to the “PV &
Trend” format only
PV Selection
(FF read only)
Product Level
% Prod Level
Dist To Prod
Prod Lvl Rate
Product Volume
Vapor Thick
% Vapor Thick
Vapor Volume
Intf Level
% Intf Level
Dist To Intf
Intf Lvl Rate
Upr Prod Thick
Lower Prod Vol
Upper Prod Vol
Loop Output
Percent Output
Select the Process
Variable (PV) to be
shown on screen.
Choices based on
Measure Product and
Volume Calc Type.
Display Units
(FF read only)
Level, Interface &
Distance:
ft, in, m, cm, mm
Volume:
ft
3
, in
3
, US gal, Imp gal,
bbl oil, bbl liq, yd
3
, m
3
,
liters
Level Rate:
ft/s, ft/m, m/s, in/min, m/h
Internal temp:
°F, °C
Select the Display
Units for the selected
PV.
Custom Units
(FF read only)

Enter Custom Units
using any
alphanumeric value up
to 14 characters long.
Read only
Decimals
(FF read only)
None
X.X
X.XX
X.XXX
Select the decimal
resolution for the PV.
Press  to enter
menu selection
 and  to select
from list.
 to enter