Revision 8 SLG 700 SmartLine Level Transmitter User’s Manual Page 171
9.4 Marking ATEX Directive
General
The following information is provided as part of the labeling of the transmitter:
Manufacturer name and location
Notified Body identification: SIRA
For complete model number, see the Model Selection Guide for the level transmitter.
The serial number of the transmitter is located on the top nameplate. The first five
digits of the serial number, yyWww, indicate the year and week of manufacture using
the last two digits of the year (yy), the week identifier "W", and the two digit week
number (ww), in that order. For example, 17W42 indicates the date of manufacture is
the 42nd week of 2017.
Apparatus Marked with Multiple Types of Protection
The user must determine the type of protection required for installation of the equipment. The
user shall then check the box [] adjacent to the type of protection used on the equipment
certification nameplate. Once a type of protection has been checked on the nameplate, the
equipment will not be reinstalled using any of the other certification types.
To Next Page
Loading...
Need help?
General
