Page 36 SLG 700 SmartLine Level Transmitter User’s Manual Revision 8
3 Transmitter Installation
3.1 Preparation
Installation sequence
Table 3-1 lists the overall installation steps. Details are provided in the indicated sections.
Table 3-1: Installation sequence
After Installation check the transmitter’s configuration and tune if necessary. Transmitters
that were ordered using Honeywell’s SmartLine Application and Validation Tool (AVT) will
come with parameters pre-loaded so that the transmitter will give accurate level
measurements out-of-the-box. Refer to SLG 700 HART Option Manual, #34-SL-25-06 or the
SLG 700 FOUNDATION Fieldbus manual, #34-SL-25-07.
To Next Page
Loading...
