Revision 8 SLG 700 SmartLine Level Transmitter User’s Manual Page 165
9 Appendix Certifications
9.1 Safety Instrumented Systems (SIS) Installations
For Safety Certified Installations, please refer to SLG 700 Safety Manual, document
#34-SL-25-05 for installation procedure and system requirements.
9.2 European Directive Information (EU)
The SLG 700 Transmitter complies with the following directives.
Electromagnetic Compatibility (EMC)
Explosion Protection Regulation (where
applicable)
Pressure Equipment Directive (PED)
The SLG 700 Transmitter complies with the following EMC standards
General EMC requirements for Electrical
equipment for measurement, control, and
laboratory use
Functional Safety EMC requirements for
Electrical equipment for measurement,
control, and laboratory use
EN 55011, CISPR 16-1
and CISPR 16-2
Emissions of radio frequencies
NAMUR NE21
(HART / 4-20mA only)
Electromagnetic compatibility of industrial
process and laboratory control equipment
The SLG 700 transmitter complies with the radiated immunity requirements when a coax
probe is used OR with any probe when the device is installed in a metallic vessel or stillwell.
When the device is installed on an open-air tank or non-metallic tank the electromagnetic
emissions levels will remain compliant with any probe, however, a coax probe is
recommended if a strong electromagnetic field may be present near the probe.
A copy of the SLG 700 EU Declaration of Conformity can be downloaded here:
https://www.honeywellprocess.com/library/support/Public/Documents/50099165.pdf
To Next Page
Loading...
Need help?
General
