To Next Page

To Previous Page

Function Blocks

3/99 Function Block Reference Guide 171

2.56 RSW Function Block

Description

The

RSW

label stands for

Rotary Switch

This block is part of the

Signal Selectors

category. It looks like

this graphically on the Control Builder.

Function

The single output value is selected from up to 8 analog inputs by a number of from 1 to 8.

Note: Numbers less than one select input one as the output

Numbers greater than eight select Input 8 as the output.

Input

IN1 = Input 1

IN2 = Input 2

IN3 = Input 3

IN4 = Input 4

IN5 = Input 5

IN6 = Input 6

IN7 = Input 7

IN8 = Input 8

SEL = Selects Input # to Output

Output

OUT = Output Value

Block Properties

Double click on the function block to access the function block properties dialog box.

Block Order (Read Only)

You can change the assigned execution order number by selecting “Execution Order” in the “Configure”

menu and arrange the order to suit your control strategy.

Honeywell UMC800 Reference Guide

Other manuals for Honeywell UMC800