Honeywell UMC800 Reference Guide

Function Blocks
Function Block Reference Guide 3/9924
2.7 AMB Function Block,
continued
Configuration Parameters,
continued
GENERAL
TAB
It looks like this graphically on the Control Builder.
Table 2-5
describes the parameters and the value or
selection
Table 2-5 General Tab Configuration Parameters
Properties
Function
Parameter Index# Parameter Description Value or Selection
Block Tag Name
N/A 8-character tag name
Descriptor
N/A Block description
Start/Restart Initial Mode
N/A Mode at NEWSTART
Newstart is the first scan
cycle following the cold
start of the controller
MAN Manual
AUTO Automatic
Power up
Mode
N/A Mode at power up
MAN Manual
PREVIOUS
Same mode (auto or
manual)
Power Up
Out
N/A
Output at Power up
FAILSAFE
Failsafe output
value.
LAST OUT
Same as at power
down.
Failsafe Out
7 Failsafe Output Value
-5 to 105 (default 0)

Honeywell UMC800 Specifications

General

Brand	Honeywell
Model	UMC800
Category	Controller
Language	English