Contents
Function Block Reference Guide 3/99ii
Copyright, Notices, and Trademarks
© Copyright 1999 by Honeywell Inc.
Revision B – 3/99
While this information is presented in good faith and believed to be
accurate, Honeywell disclaims the implied warranties of merchantability
and fitness for a particular purpose and makes no express warranties
except as may be stated in its written agreement with and for its
customer.
In no event is Honeywell liable to anyone for any indirect, special or
consequential damages. The information and specifications in this
document are subject to change without notice.
This document was prepared using Information Mapping methodologies
and formatting principles.
UMC800 Universal Multi-loop Controller is a trademark of Honeywell, Inc.
Information Mapping is a trademark of Information Mapping, Inc.
To Next Page
Loading...
Need help?
General
