HP Integrity rx4640 - Other Event Logs and General Diagnostic Tools

Chapter 6
Troubleshooting
Troubleshooting Using Offline Support Tools
136
• Forward progress
• Current boot
• Previous boot
• Live events
• Clear SEL/FPL logs
Step 5. For a complete explanation of the management processor and all commands see Chapter 5, “Utilities.”
Disk and I/O Path Logging
Some failures result in I/O path logging. These paths help to indicate the source of the error and may be included in the error
message or logged into console or event logs. The following table describes the disk drive and PCI slot paths for your HP
Server.
Other Event Logs and General Diagnostic Tools
This section describes other general diagnostic tools that will be provided for your HP Server and how to generate other event
logs for troubleshooting diagnosis.
• General diagnostic tools available to support your HP Server are:
— MCA analyzer
• Event logs not generated by the management processor include:
— Machine check abort log (MCA)
Table 6-4 Disk and DVD Paths
Slot Path
Slot 1 Acpi(HWP0002,100)/Pci(1|0)
Slot 2 Acpi(HWP0002,100)/Pci(1|1)
DVD Acpi(HWP0002,0)/Pci(3|0)
Table 6-5 I/O Paths
I/O Slot Path
Slot 1 Acpi(HWP0002,100)/Pci(2|0)
Slot 2 Acpi(HWP0002,100)/Pci(1|0)
Slot 3 Acpi(HWP0002,400)/Pci(2|0)
Slot 4 Acpi(HWP0002,400)/Pci(1|0)
Slot 5 Acpi(HWP0002,500)/Pci(2|0)
Slot 6 Acpi(HWP0002,500)/Pci(1|0)
Slot 7 Acpi(HWP0002,200)/Pci(1|0)
Slot 8 Acpi(HWP0002,600)/Pci(1|0)