Chapter 4
Installing Additional Components and Configuring
Installing Processors and Memory
40
Figure 4-6 Volume Filler Installation in Slot 2
Installing Processors and Memory
This section provides information about installing processors and memory. The processors and memory extender boards are
located under the front cover.
WARNING Voltages are present at various locations within the server whenever an AC power source is connected.
This voltage is present even when the main power switch is in the off position.
Ensure that the system is powered down and all power sources have been disconnected from the server
prior to attempting the following procedures.
Failure to observe this warning could result in personal injury or damage to equipment.
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety
precautions could result in damage to the server.
Installing Processors
CAUTION Ensure that the cache size is identical for all processors. Failure to observe this caution will result in system
failure.
To Next Page
Loading...
Need help?
General