HP Integrity rx4640

Chapter 4
Installing Additional Components and Configuring
Fibre Channel (FC) Boot Configuration
83
04/15/03 11:25p <DIR> 4,096 .
04/15/03 11:25p <DIR> 0 ..
04/15/03 11:25p <DIR> 4,096 HPUX
04/15/03 11:25p <DIR> 4,096 Intel_Firmware
04/15/03 11:25p <DIR> 4,096 DIAG
04/15/03 11:25p <DIR> 4,096 HP
04/15/03 11:25p <DIR> 4,096 TOOLS
Exit
EFI Boot Maintenance Manager ver 1.10 [14.61]
Select file or change to new directory:
04/15/03 11:25p <DIR> 4,096 .
04/15/03 11:25p <DIR> 4,096 ..
05/05/03 04:54p 425,747 HPUX.EFI
05/05/03 04:54p 24,576 NBP.EFI
Exit
Step 12. Enter a description of the new FC boot device and the data type.
Filename: \EFI\HPUX\HPUX.EFI
DevicePath: [Acpi(HWP0002,500)/Pci(2|0)/Fibre(WWN21000020375AE714,Lun0)/HD(Par
t1,SigF7D00000)/\EFI\HPUX\HPUX.EFI]
IA-64 EFI Application 05/05/03 04:54p 425,747 bytes
Enter New Description: FC Boot Disk
New BootOption Data. ASCII/Unicode strings only, with max of 240 characters
Enter BootOption Data Type [A-Ascii U-Unicode N-No BootOption] : n
Save changes to NVRAM [Y-Yes N-No]: y
Step 13. The procedure is now complete and the FC disk will show up in the boot menu.
EFI Boot Manager ver 1.10 [14.61] Firmware ver 79.03 [4321]
Please select a boot option
EFI Shell [Built-in]
Internal Bootable DVD
FC Boot Disk
Boot Option Maintenance Menu