HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 11
About this guide
This guide provides information about managing an HP P2000 G3 MSA System by using its
command-line interface (CLI).
Intended audience
This guide is intended for storage system administrators.
Prerequisites
Prerequisites for using this product include knowledge of:
• Network administration
• Storage system configuration
• Storage area network (SAN) management and direct attach storage (DAS)
• Fibre Channel, Serial Attached SCSI (SAS), Internet SCSI (iSCSI), and Ethernet protocols
Related documentation
In addition to this guide, please refer to online help and the following documents for this product:
• HP MSA System Racking Instructions
• HP P2000 G3 MSA Systems Installation Instructions
• HP P2000 G3 MSA System Cable Configuration Guide
• HP P2000 G3 FC MSA System User Guide
• HP P2000 G3 FC/iSCSI MSA System User Guide
• HP P2000 G3 SAS MSA System User Guide
• HP P2000 G3 iSCSI MSA System User Guide
• HP P2000 G3 MSA System SMU Reference Guide
• HP P2000 G3 MSA System Event Descriptions Reference Guide
You can find these documents from the Manuals page of the HP Business Support Center web site:
http://www.hp.com/
go/p2000/manuals.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures