HP P2000 G3 Cli Reference Guide

414 XML API basetype properties
host-view
Properties
Example
# show host-maps
...
<OBJECT basetype="host-view" name="host-view" oid="1" format="labeled">
<PROPERTY name="id" key="true" type="string">10000000c978526c</PROPERTY>
<PROPERTY name="hba-nickname" type="string">test7_hba1</PROPERTY>
<PROPERTY name="host-profile" type="string">Standard</PROPERTY>
</OBJECT>
...
Embedded basetypes
• host-view-mappings
Table 39 host-view properties
Name Type Description
id string FC or SAS host port WWN, or iSCSI host initiator node name (typically the
IQN).
hba-nickname string User-defined name of the host port, or blank.
host-profile string • Standard: The host allows LUN 0 to be assigned to a mapping. This is the
default.
• OpenVMS: The host does not allow LUN 0 to be assigned to a mapping.
• HP-UX: The host allows LUN 0 to be assigned to a mapping and uses Flat
Space Addressing.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures