HP P2000 G3 Cli Reference Guide

506 XML API basetype properties
volume-copy-status
Properties
Example
# show volumecopy-status
...
<OBJECT basetype="volume-copy-status" name="volume" oid="1" format="rows">
<PROPERTY name="vc_volume_name" type="string">vd02_v001_c001</PROPERTY>
<PROPERTY name="serial-number" key="true" type="string">SN</PROPERTY>
<PROPERTY name="virtual-disk-name" type="string">vd02</PROPERTY>
<PROPERTY name="source-volume" type="string">vd02_v001</PROPERTY>
<PROPERTY name="progress" type="string">6%</PROPERTY>
<PROPERTY name="status" type="string">Unavailable</PROPERTY>
<PROPERTY name="status-reason" type="string">VC In Progress</PROPERTY>
</OBJECT>
...
Table 91 volume-copy-status properties
Name Type Description
vc_volume_name string Destination volume name.
serial-number string Destination volume serial number.
virtual-disk-
name
string Destination vdisk name.
source-volume string Source volume name.
progress string Percent complete of the volume copy (0%–99%).
status string • Unavailable: A volume copy is in progress to the destination volume.
• Suspended: The source volume went offline while a volume copy was in
progress. When the source volume comes back online, the copy process
resumes from the point where it stopped.
status-reason string More information about the status value.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures