HP P2000 G3 Cli Reference Guide

388 XML API basetype properties
drives
Properties
Table 26 drives properties
Name Type Description
durable-id string Disk ID in the form disk_enclosure-ID.slot-number.
enclosure-id uint32 Enclosure ID.
slot uint32 Disk slot number.
location string Disk's enclosure ID and slot number.
port uint32 For internal use only.
scsi-id uint32 SCSI ID assigned to this disk for the primary channel.
blocks uint64 Unformatted size value in 512-byte blocks.
serial-number string Disk serial number.
vendor string Disk vendor.
model string Disk model.
revision string Disk firmware revision level.
state string Shows the disk's state or usage.
• AVAIL: The disk is available.
• FAILED: The disk is unusable and must be replaced. Reasons for this status
include: excessive media errors; SMART error; disk hardware failure;
unsupported disk.
• GLOBAL SP: The disk is a global spare.
• LEFTOVR: The disk is a leftover and can be reused after its metadata is
cleared.
• VDISK: The disk is used in a vdisk.
• VDISK SP: The disk is a spare assigned to a vdisk.
secondary-
channel
uint32 SCSI ID assigned to this disk for the secondary channel.
container-index uint32 Container index.
member-index uint32 Index for this disk in the vdisk list.
type string Type of disk interface.
• SAS: Dual-port SAS.
• SAS-S: Single-port SAS.
• SATA: Dual-port SATA.
• SATA-S: Single-port SATA.
type-numeric string Numeric equivalents for type values.
• 3: SATA
• 4: SAS
• 5: SATA-S
• 6: SAS-S
pi-format string Not applicable.
pi-format-
numeric
string Not applicable.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures