HP P2000 G3 MSA System CLI Reference Guide 41
clear events
Description For use by or with direction from a service technician.
Clears the event log for controller A, B, or both.
Syntax
clear events [a|b|both]
Parameters a|b|both
Optional. The controller event log to clear. If this parameter is omitted, both event logs are cleared.
Example Clear the event log for controller A:
# clear events a
Success: Command completed successfully. - The event log was successfully
cleared. (2012-01-18 10:40:13)
See also • show events
To Next Page
Loading...
