HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 35
abort volumecopy
Description Aborts copying a volume. When the abort is complete, the destination volume is deleted.
Syntax
abort volumecopy volume
Parameters volume
Name or serial number of the source volume, the destination volume, or if a snapshot is being
copied, its associated master volume. For volume syntax, see Command syntax on page 22.
Example Abort creating destination volume vd1_copy:
# abort volumecopy v1_copy
Success: Command completed successfully. (vd1_copy) - The volume copy was
aborted. (2012-01-21 12:04:20)
See also • show volumecopy-status
• show volumes
• volumecopy

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures