HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 283
show shutdown-status
Description Shows whether each Storage Controller is active or shut down.
Syntax
show shutdown-status
Output Message stating whether each controller is up (active), down (shut down), or not installed.
Example Show the shutdown status of each controller:
# show shutdown-status
Storage Controller A up
Storage Controller B down
Success: Command completed successfully. (2011-10-10 15:26:37)
Basetypes • shutdown-status
• status
See also • restart
• shutdown

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures