196 Alphabetical list of commands
show awt
See show auto-write-through-trigger.
Example Show the system’s auto-write-through trigger settings:
# show auto-write-through-trigger
Auto Write-Through Triggers
---------------------------
Controller Failure: Disabled
Supercap Failure: Enabled
CompactFlash Failure: Enabled
Power Supply Failure: Disabled
Fan Failure: Disabled
Temperature Exceeded: Disabled
Partner Notify: Disabled
Auto Write Back: Enabled
Success: Command completed successfully. (2012-01-18 14:30:31)
Basetypes • auto-write-through-trigger
• status
See also • set auto-write-through-trigger
To Next Page
Loading...
