HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 417
io-modules
Properties
Table 42 io-modules properties
Name Type Description
durable-id string I/O module ID.
controller-id string • A: Controller A.
• B: Controller B.
controller-id-
numeric
string Numeric equivalents for controller-id values.
• 0: B
• 1: A
name string FRU name.
description string FRU long description.
part-number string FRU part number.
serial-number string FRU serial number.
revision string FRU hardware revision level.
dash-level string FRU template revision number.
fru-shortname string FRU short description.
mfg-date string Date and time, in the format year-month-day hour:minutes:seconds
(UTC), when the controller's PCBA was programmed or a power supply module
was manufactured.
mfg-date-
numeric
string Unformatted mfg-date value.
mfg-location string City, state/province, and country where the FRU was manufactured.
mfg-vendor-id string JEDEC ID of the FRU manufacturer.
position string Fan unit position, as viewed from the back of the enclosure.
• Top
• Bottom
• Left
• Right
position-
numeric
string Numeric equivalents for position values.
• 0: Top
• 1: Bottom
• 2: Left
• 3: Right
configuration-
serialnumber
string Configuration serial number.
phy-isolation string Shows whether the automatic disabling of SAS expander PHYs having high error
counts is enabled or disabled for this controller.
• Enabled: PHY fault isolation is enabled. This is the default.
• Disabled: PHY fault isolation is disabled.
phy-isolation-
numeric
string Numeric equivalents for phy-isolation values.
• 0: Enabled
• 1: Disabled

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures