HP P2000 G3 Cli Reference Guide

406 XML API basetype properties
expander-ports
Properties
Table 34 expander-ports properties
Name Type Description
durable-id string Expander port ID.
enclosure-id uint32 Enclosure ID.
controller string • A: Controller A.
• B: Controller B.
controller-
numeric
string Numeric equivalents for controller values.
• 0: B
• 1: A
name string • Out Port: Egress (expansion) port on controller module or an expansion
module. Can be connected to an ingress port on an expansion module.
• In Port: Ingress port on an expansion module. Can be connected to an
egress (expansion) port on a controller module or an expansion module.
name-numeric string • 2: In Port
• 3: Out Port
status string Expander port status.
• Up
• Warning
• Error
• Not Present
• Unknown
• Disconnected
status-numeric string Numeric equivalents for status values.
• 0: Up
• 1: Warning
• 2: Error
• 3: Not Present
• 4: Unknown
• 6: Disconnected
health string • OK
• Degraded
• Fault
• N/A
• Unknown
health-numeric string Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: Unknown
• 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-
recommendation
string If Health is not OK, the recommended actions to take to resolve the health issue.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures