To Next Page

To Previous Page

HP P2000 G3 MSA System CLI Reference Guide 179

set snap-pool-threshold

Description Sets the percentages of snap-pool space used that trigger the warning and error threshold policies.

Three thresholds are defined:

• Warning: The snap pool is moderately full. When this threshold is reached, an event is generated

to alert the administrator.

• Error: The snap pool is nearly full and unless corrective action is taken, snapshot data loss is

probable. When this threshold is reached, an event is generated to alert the administrator and

the associated snap-pool policy is triggered.

• Critical: The snap pool is 98% full and data loss is imminent. When this threshold is reached, an

event is generated to alert the administrator and the associated snap-pool policy is triggered.

Syntax

set snap-pool-threshold

[warning #%]

[error #%]

snap-pool

Parameters warning #%

The percent of snap-pool space used that triggers the warning threshold policy. This value must be

less than the error threshold value. The default is 75%.

error #%

The percent of snap-pool space used that triggers the error threshold policy. This value must be less

than 98%. The default is 90%.

snap-pool

Name or serial number of the snap pool to set the threshold for. For volume syntax, see Command

syntax on page 22.

Example Set the warning and error thresholds for snap pool SP1:

# set snap-pool-threshold warning 60% error 85% SP1

Success: Command completed successfully. (2012-01-21 12:33:46)

HP P2000 G3 Cli Reference Guide

Other manuals for HP P2000 G3