HP P2000 G3

342 Alphabetical list of commands
versions
Description Shows firmware and hardware version information for each controller module. Alias: show
versions.
Syntax
versions [detail]
Parameters detail
Optional. Shows information about the versions of firmware and hardware in each controller
module. If this parameter is omitted, only firmware-bundle information is shown.
Example Show firmware-bundle version information for a system in which controller B is not installed:
# versions
Controller A Versions
---------------------
Bundle Version: value
Build Date: value
Controller B Versions
---------------------
Bundle Version: Not Present
Build Date: Not Present
Show detailed version information for each controller:
# versions detail
Controller A Versions
---------------------
Storage Controller CPU Type: value
Bundle Version: value
Build Date: value
Storage Controller Code Version: value
Storage Controller Code Baselevel: value
Memory Controller FPGA Code Version: value
Storage Controller Loader Code Version: value
CAPI Version: value
Management Controller Code Version: value
Management Controller Loader Code Version: value
Expander Controller Code Version: ver
CPLD Code Version: value
Hardware Version: value
Host Interface Module Version: value
Host Interface Module Model: value
Backplane Type: value
Host Interface Hardware (Chip) Version: value
Disk Interface Hardware (Chip) Version: value
Controller B Versions
---------------------
...
Success: Command completed successfully. (2012-01-19 15:36:07)
Basetypes • versions
• status
See also • show inquiry