24 Using the CLI
The locale setting determines the character used for the decimal (radix) point, as shown below.
Event log
A controller enclosure’s event log records all events that have occurred in or been detected by the
controller modules and encompasses all field-replaceable units (FRUs) in the storage system.
Each event has one of the following levels, in decreasing severity:
• Critical. A failure occurred that may cause a controller to shut down. Correct the problem
immediately.
• Error. A failure occurred that may affect data integrity or system stability. Correct the problem as soon
as possible.
• Warning. A problem occurred that may affect system stability but not data integrity. Evaluate the
problem and correct it if necessary.
• Informational. A configuration or state change occurred, or a problem occurred that the system
corrected. No action is required.
For information about viewing events, see the show events command.
Table 5 Size representations in base 2 and base 10
Base 2 Base 10
Unit Size in bytes Unit Size in bytes
KiB (kibibyte) 1,024 KB (kilobyte) 1,000
MiB (mebibyte) 1,024
2
MB (megabyte) 1,000
2
GiB (gibibyte) 1,024
3
GB (gigabyte) 1,000
3
TiB (tebibyte) 1,024
4
TB (terabyte) 1,000
4
PiB (pebibyte) 1,024
5
PB (petabyte) 1,000
5
EiB (exbibyte) 1,024
6
EB (exabyte) 1,000
6
Table 6 Decimal (radix) point character by locale
Language Character Examples
English, Chinese, Japanese, Korean Period (.) 146.81 GB
3.0 Gb/s
Dutch, French, German, Italian, Spanish Comma (,) 146,81 GB
3,0 Gb/s
To Next Page
Loading...
Need help?
General
