HP P2000 G3 Cli Reference Guide

124 Alphabetical list of commands
reset vdisk-statistics
Description Resets performance statistics for all or specified vdisks.
Syntax
reset vdisk-statistics [vdisks]
Parameters vdisks
Optional. Names or serial numbers of the vdisks to reset statistics for. For vdisk syntax, see
Command syntax on page 22. If this parameter is omitted, statistics are reset for all vdisks.
Example Reset statistics for vdisks VD1 and MyVdisk:
# reset vdisk-statistics VD1,MyVdisk
Success: Command completed successfully. (2012-01-21 11:37:44)
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset host-port-statistics
• reset volume-statistics
• show vdisk-statistics
• show vdisks

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures