HP P2000 G3

408 XML API basetype properties
fan
Properties
Table 35 fan properties
Name Type Description
durable-id string Fan unit ID in the form fan_enclosure-ID.fan-number.
name string Fan unit name in the form Fan loc:position-PSU power-supply-ID for
a controller enclosure or P2000 drive enclosure; Fan fan-unit-ID for a
D2700 or MSA70 enclosure. The position is as viewed from the back of the
enclosure.
location string Fan location in the form Enclosure enclosure-ID - position. The
position is as viewed from the back of the enclosure.
status string Fan unit status.
• Up
• Warning
• Error
• Not Present
• Unknown
status-numeric string Numeric equivalents for status values.
• 0: Up
• 1: Warning
• 2: Error
• 3: Not Present
• 4: Unknown
speed uint32 Fan speed (RPM).
position string Fan position, as viewed from the back of the enclosure.
• Left
• Right
• Top
• Bottom
position-
numeric
string Numeric equivalents for position values.
• 0: Left
• 1: Right
• 2: Top
• 3: Bottom
serial-number string • (blank): Not applicable.
• Serial number of a fan in a D2700 drive enclosure.
fw-revision string • (blank): Not applicable.
• Firmware revision of a fan in a D2700 drive enclosure.
hw-revision string • (blank): Not applicable.
• Hardware revision of a fan in a D2700 drive enclosure.
health string • OK
• Degraded
• Fault
• Unknown