HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 265
show refresh-counters
Description In XML API format only, shows when the data represented by the basetype was last updated.
The value 0 means the data has never been updated and is not cached. A value other than 0 is a
timestamp indicating that the data has been updated. If the value has changed since the last time
you called this command then the data has changed.
Syntax
show refresh-counters
Basetypes • refresh-counters
• status
See also • set cli-parameters

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures