HP P2000 G3

HP P2000 G3 MSA System CLI Reference Guide 307
show users
Description Shows configured user accounts.
Syntax
show users [user]
Input
user
Optional. User name to show settings for.
Output Username
User name.
Roles
• monitor: View-only access to selected user interfaces.
• manage: Modify access to selected user interfaces.
User Type
The user’s experience level: Novice, Standard, Advanced, or Diagnostic. All user types have
access to all commands.
User Locale
Display language for this user. The default is English.
WBI
• x: The user can access the web-browser interface (SMU). This is the default.
• (blank): The user cannot access this interface.
CLI
• x: The user can access the command-line interface. This is the default.
• (blank): The user cannot access this interface.
FTP
• x: The user can access the file transfer protocol interface.
• (blank): The user cannot access this interface. This is the default.
SMI-S
• x: The user can access the Storage Management Initiative Specification (SMI-S) interface.
• (blank): The user cannot access this interface. This is the default.
SNMP
• U: The user can access the SNMPv3 interface and view the MIB.
• T: The user can access the SNMPv3 interface and receive trap notifications.
• (blank): The user cannot access this interface. This is the default.
Authentication Type
• MD5: MD5 authentication.
• SHA: SHA (Secure Hash Algorithm) authentication.
• none: No authentication.
Privacy Type
• DES: Data Encryption Standard.
• AES: Advanced Encryption Standard.
• none: No encryption.
Password
User password. For a standard user the password is represented by eight asterisks. For an SNMPv3
user this is the authentication password; it is shown in clear text for reference when configuring users
in the corresponding management application.