HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 213
show disks
Description Shows information about all disks in the storage system. If no parameter is specified, the command
shows information for all installed disks.
NOTE: In console format, to aid reading, disks are sorted to display in order by enclosure and disk
number. In API formats, output is not sorted because it is expected to be manipulated by a host
application.
Syntax To show information about disks:
show disks
[disks]|[free]|[all]|[vdisk vdisk]
[perf]
To show information about all disk slots:
show disks encl
Parameters disks
Optional. IDs of the disks to show information about. For disk syntax, see Command syntax on
page 22.
free
Optional. Shows information about all disks that are available.
all
Optional. Shows information about all installed disks.
vdisk vdisk
Optional. Shows information for disks in the specified vdisk. For vdisk syntax, see Command syntax
on page 22.
perf
Optional. Shows performance statistics from the latest historical sample for each disk. Statistics
shown include total I/Os (reads and writes), total amount of data transferred, and average I/O
response time.
encl
Optional. Shows information about each disk slot, whether it contains a disk or not. Do not specify
this parameter with other parameters; they will be ignored.
Output
Without the encl option:
Location
Disk’s enclosure ID and slot number.
Serial Number
Disk serial number.
Vendor
Disk vendor.
Rev
Firmware revision number.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures