HP P2000 G3 Cli Reference Guide

120 Alphabetical list of commands
reset host-port-statistics
Description Resets performance statistics for controller host ports.
Syntax
reset host-port-statistics [ports ports]
Parameters ports ports
Optional. The controller ID and port number of ports to reset statistics for. For port syntax, see
Command syntax on page 22. If this parameter is omitted, statistics are reset for all controller host
ports.
Example Reset statistics for all controller host ports:
# reset host-port-statistics
Success: Command completed successfully. (2012-01-21 11:36:59)
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset disk-statistics
• reset vdisk-statistics
• reset volume-statistics
• show host-port-statistics
• show ports

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures