HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 83
delete snap-pool
Description Deletes a snap pool.
NOTE: You must disassociate all master volumes from the snap pool before you can delete it.
Syntax
delete snap-pool snap-pool
Parameters snap-pool
Name or serial number of the snap pool to delete. For volume syntax, see Command syntax on
page 22.
Example Delete snap pool SP1:
# delete snap-pool SP1
Success: Command completed successfully. (SP1) - The snap-pool was deleted.
(2012-01-18 12:13:46)
See also • show master-volumes
• show snap-pools

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures