HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 475
snapshot-with-retention-tasks
Properties
Example
# show tasks
...
<OBJECT basetype="snapshot-with-retention-tasks" name="task-snapshow-with-retention"
oid="6" format="pairs">
<PROPERTY name="master-volume-name" type="string">vd02_v001</PROPERTY>
<PROPERTY name="master-volume-serial" type="string">SN</PROPERTY>
<PROPERTY name="snapshot-prefix" type="string">SnapSet001</PROPERTY>
<PROPERTY name="retention-count" type="uint32">1</PROPERTY>
<PROPERTY name="last-created" type="string"></PROPERTY>
</OBJECT>
...
Table 75 snapshot-with-retention-tasks properties
Name Type Description
master-volume-
name
string Source volume name.
master-volume-
serial
string Source volume serial number.
snapshot-prefix string A label to identify snapshots created by this task. Snapshot names have the
format prefix_s#, where # starts at 001.
retention-count uint32 Number of snapshots to retain with this prefix, from 1 to 32. When a new
snapshot exceeds this limit, the oldest snapshot with the same prefix is deleted.
last-created string Name of the last snapshot created by the task, or blank.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures