HP P2000 G3 Cli Reference Guide

442 XML API basetype properties
refresh-counters
Properties
Example
This example shows output for the first three of the many basetypes:
# show refresh-counters
...
<OBJECT name="refresh-counters" basetype="refresh-counters">
<PROPERTY name="drive-summary">0</PROPERTY>
<PROPERTY name="disk-hist-statistics">0</PROPERTY>
<PROPERTY name="virtual-disk-summary">0</PROPERTY>
...
</OBJECT>
...
Table 55 refresh-counters properties
Name Type Description
basetype-name (Not
shown)
Shows when the data represented by the base type was last updated.
• 0: The data has never been updated and is not cached.
• nonzero-number: A timestamp indicating that the data has been
updated. If the value has changed since the last time you called this
command then the data has changed.

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures