HP P2000 G3 Cli Reference Guide

118 Alphabetical list of commands
reset disk-statistics
Description Resets performance statistics for disks.
This command resets basic disk statistics but not disk error statistics. To reset these, use the reset
disk-error-statistics command.
Syntax
reset disk-statistics
Example Reset statistics for all disks:
# reset disk-statistics
Success: Command completed successfully. (2012-01-21 11:35:52)
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset host-port-statistics
• reset vdisk-statistics
• reset volume-statistics
• show disk-statistics

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures